All Guides
📖 Guide🎮 Catapult Smash

Catapult Smash: Shots, Chains & 3 Stars

Earn 3 stars on every Catapult Smash level. Learn angle calculation, projectile type selection, and chain-reaction targeting to maximise damage per shot.

Catapult Smash gives you a limited number of projectiles and a stack of targets to knock down. Using the fewest shots to cause the most damage earns 3 stars. Getting there requires reading the structure, choosing the right projectile, and planning for chain reactions — all before you release the first shot.

Getting Started

The catapult sits on the left side of the screen. A structure of blocks, targets, and sometimes shields sits on the right. You drag back on the catapult to aim and set power, then release to fire.

Controls:

  • Click and drag (or touch and drag) the catapult arm to set angle and power.
  • Release to fire the projectile.
  • Switch projectile types using the button or selector before firing (if the level provides multiple types).
  • After all projectiles are used (or all targets are cleared), the round ends and your star rating is displayed.

Star rating (most levels):

  • 3 stars — all targets cleared using the fewest possible shots.
  • 2 stars — all targets cleared with more shots.
  • 1 star — targets cleared but high shot count, or some targets remain.

Core Mechanics Explained

Trajectory Arc

Projectiles follow a parabolic arc — they rise and then fall due to gravity. The angle you set determines how steep the arc is, and the power determines how far it travels. High angles produce steep arcs that land at shorter distances; low angles produce flat arcs that travel farther. Most level setups reward mid-range angles (30–60 degrees) for optimal reach.

Impact and Structural Physics

When a projectile hits a structure, it transfers momentum to the struck block. Blocks can topple other blocks, which topple further blocks in a chain. The key insight: a well-placed shot causes far more damage through the resulting chain reaction than through direct impact alone. Always aim for the weakest structural point — the base of a tower, the central column of a wall — rather than just the nearest block.

Projectile Types

Different projectile types suit different situations:

  • Stone/Ball — standard. Good against wooden blocks and open structures.
  • Explosive — detonates on impact, dealing area damage. Ideal for compact clusters of blocks.
  • Penetrating — passes through one or more blocks before stopping. Perfect for tall towers or horizontally layered structures.
  • Bouncing — ricochets off hard surfaces. Useful for reaching targets behind walls or at awkward angles.

If a level gives you a choice of projectile, read the structure before deciding. Explosive is usually best for tight clusters; penetrating for towers; bouncing for structures with shields or walls blocking direct shots.

Tips & Strategies

Study the Structure Before Firing

Spend five to ten seconds looking at the entire target structure before the first shot. Identify: what are the targets (marked objects that must be hit)? What are the support structures (blocks holding targets in place)? What is the weakest point that, if hit, causes the most collapse? The best shot is usually not at a target directly — it is at a support element that drops targets onto each other.

Hit the Base, Not the Top

Towers and stacked structures fall more decisively when hit at the base. A base hit topples the whole structure; a top hit knocks off the top block and leaves the base standing. If you can reach the base of a structure with your arc, that is almost always the better shot.

Create Domino Chains

A domino chain occurs when one falling block hits the next, which hits the next. Structures arranged in a line or stair pattern are perfect for this. Aim your first shot to topple the rearmost element in a line — it falls onto the structure in front of it, creating a cascade that your single shot would not have achieved by direct impact.

Allocate Projectile Types per Structure Zone

When you have multiple projectile types, mentally divide the structure into zones and assign projectile types to each. Use explosives on the dense central cluster, penetrating shots on the rear tower, and stones for any exposed single targets. Fire in the order that creates the best chain reactions — typically explosive center first, to clear the zone that was otherwise hardest to reach.

Aim for Multiple Targets per Shot

Any shot that strikes one target is acceptable; a shot that hits two or three targets is excellent. Look for shots that travel through one target and continue into another, or that hit a structure element positioned between multiple targets.

Advanced Techniques

The Lob Shot for Buried Targets

Targets placed behind walls or under overhangs cannot be hit with a direct flat trajectory. A steep lob shot (high angle, reduced power) drops the projectile nearly vertically, landing behind the wall or into the opening above an overhang. Practice adjusting angle versus power — the same distance can be reached with either a high steep arc or a low flat one.

Detonation Timing on Explosive Shots

Explosive projectiles that have a delay detonation (if the level type offers this) are best triggered after the projectile has passed through or settled among the target cluster. If your level uses immediate-impact explosives, aim at the geometric centre of a cluster to maximise the number of blocks caught in the blast radius.

Reading Structural Weakness Under Shields

Some structures have hard shields protecting key blocks. Rather than firing at the shield directly, look for a gap above or below it, or for support blocks beside the shield that, when toppled, bring the shield and its protected block down together. Penetrating projectiles can sometimes punch through thin shields.

Save Powerful Shots for Problem Areas

If you have one explosive projectile and several standard ones, do not use the explosive on the first target out of impulse. Clear the easily reachable targets with standard shots and save the explosive for the dense cluster or the protected group that cannot be reached any other way.

Common Mistakes to Avoid

  • Firing at the top of structures. Top hits produce minimal chain reactions. Always prefer base hits.
  • Using the most powerful projectile first. Save special projectiles for the hardest part of the structure. Using the explosive on the first easy cluster wastes it.
  • Ignoring chain reaction potential. A shot that directly hits a target but causes no further collapse is worse than a slightly offset shot that topples three blocks in a chain.
  • Not accounting for trajectory drop. For long-range shots, the arc drops significantly by the time it reaches the target. Aim higher than the target seems to require; gravity will bring it down to the right height.
  • Giving up on 3 stars after one shot. If the first shot does not go as planned, assess what damage it did before firing the next. Sometimes a “bad” first shot sets up an excellent second shot by partially collapsing the structure.

Final Thoughts

Catapult Smash rewards patience and structure-reading over fast reactions. Spend time before each shot studying the layout, identifying the weakest point, and planning which projectile type to use and in which order. A methodical approach — base shots, domino chains, special projectiles reserved for the hardest zones — earns 3 stars on nearly every level once you have internalised the physics. The catapult does the work; your job is to aim it somewhere that makes the whole structure do the rest.